Taps and Dies

More

GPM Tap Handle

This is the Great Planes Tap Handle.FEATURES: It is used to slowly and precisely turn drill bits, taps, and whatever else will fit inside its metal 1/4" adjustable chuck.INCLUDES: One...

$ 12.99
Save $ 0.91 K & S Die 0-80

K & S Die 0-80

This is a 0-80 Die from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Rethreads 0-80 thread pattern.Intended for use on K+S Aluminum and Brass Stock.INCLUDES: One 0-80 Die.REQUIRES:...

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 1-72

K & S Die 1-72

This is a 0-80 Die from K&S Engineering. FEATURES: A must for the scratch builder, modeler, etc.Rethreads 1/72 thread pattern. INCLUDES: One 1/72 Die. REQUIRES: Die Handle (KSM420) SPECS:    Thread Pattern: 1-72Diameter:...

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 2-56

K & S Die 2-56

This is a 2-56 Die from K&S Engineering. FEATURES: A must for the scratch builder, modeler, etc.Rethreads 2-56 thread pattern. INCLUDES: One 2-56 Die. REQUIRES: Die Handle (KSM420) SPECS: Thread Pattern:...

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 2.5mm

K & S Die 2.5mm

This is a 2.5mm Die from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Rethreads 2.5mm thread pattern.INCLUDES: One 2.5mm Die.REQUIRES: Die Handle (KSM420)SPECS:    2.5mm x 0.45mm

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 2mm 460

K & S Die 2mm 460

FEATURES: A must for the scratch builder, modeler, etc.Rethreads 2.5mm thread pattern.INCLUDES: One 2.5mm Die.REQUIRES: Die Handle (KSM420)SPECS:    2mm x 0.4mm

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 3-48

K & S Die 3-48

This is a 3-48 Die from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Rethreads 3-48 thread pattern.Intended for use on K+S Aluminum and Brass Stock.INCLUDES: One 3-48 Die.REQUIRES:...

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 3mm

K & S Die 3mm

This is a 3mm Die from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Rethreads 3mm thread pattern.INCLUDES: One 3mm Die.REQUIRES: Die Handle (KSM420)SPECS:    3mm x 0.5mm

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 4-40

K & S Die 4-40

This is a 4-40 Die from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Rethreads 4-40 thread pattern.Intended for use on K+S Aluminum and Brass Stock.INCLUDES: One 4-40 Die.REQUIRES:...

$ 8.09 $ 9.00
Save $ 0.91 K & S Die 4mm

K & S Die 4mm

This is a 4mm Die from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Rethreads 4mm thread pattern.INCLUDES: One 4mm Die.REQUIRES: Die Handle (KSM420)SPECS:    4mm x 0.7mm

$ 8.09 $ 9.00
Save $ 1.51 K & S Die Handle

K & S Die Handle

This is a Die Handle from K&S Engineering.FEATURES: Holds dies securely during rethreading process.Fits up to 13/16" diameter dies.INCLUDES: One Die Handle.SPECS:    Length: 6-1/2" (16.5cm)Width:  1-1/8" (2.9cm)

$ 11.49 $ 13.00
Save $ 0.55 K & S Tap 0-80

K & S Tap 0-80

This is a 0-80 Tap from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.Taps 0-80 thread pattern.INCLUDES: One 0-80 Tap.REQUIRES: Tap Handle (KSM434)SPECS:    Length: 1-5/8" (41mm)Thread Pattern: 0-80...

$ 4.95 $ 5.50
Save $ 0.55 K & S Tap 1-72

K & S Tap 1-72

This is a 1-72 Tap from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.1-72 thread pattern.INCLUDES: One 1-72 Tap.REQUIRES: Tap Handle (KSM434)SPECS:    Thread Pattern: 1-72

$ 4.95 $ 5.50
Save $ 0.55 K & S Tap 2-56

K & S Tap 2-56

This is a 2-56 Tap from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.2-56 thread pattern.INCLUDES: One 2-56 Tap.REQUIRES: Tap Handle (KSM434)SPECS:    Thread Pattern: 2-56

$ 4.95 $ 5.50
Save $ 0.55 K & S Tap 3-48

K & S Tap 3-48

This is a 3-48 Tap from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.3-48 thread pattern.INCLUDES: One 3-48 Tap.REQUIRES: Tap Handle (KSM434)SPECS:    Thread Pattern: 3-48

$ 4.95 $ 5.50
Save $ 0.55 K & S Tap 4-40

K & S Tap 4-40

This is a 4-40 Tap from K&S Engineering.FEATURES: A must for the scratch builder, modeler, etc.4-40 thread pattern.INCLUDES: One 4-40 Tap.REQUIRES: Tap Handle (KSM434)SPECS:    Thread Pattern: 4-40

$ 4.95 $ 5.50
Save $ 1.51 Tap & Drill Set 2-56 360 DUB360

Tap & Drill Set 2-56 360 DUB360

This is a 2-56 Tap and Drill Set from Dubroanes.FEATURES: Steel tap and drill bit for preparing holes to accept bolts.INCLUDES: One 2-56 tapOne .0669 drill bitREQUIRES: Must use a...

$ 6.49 $ 8.00
Save $ 1.31 Tap Handle 434

Tap Handle 434

FEATURES: For all K&S standard & metric tap.

$ 12.19 $ 13.50